source: tol/tolsh/tolsh.vfs/lib/tcllib1.10/struct/list.tcl

#----------------------------------------------------------------------
#
# list.tcl --
#
#       Definitions for extended processing of Tcl lists.
#
# Copyright (c) 2003 by Kevin B. Kenny.  All rights reserved.
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
# RCS: @(#) $Id: list.tcl,v 1.22 2007/05/16 22:20:16 kennykb Exp $
#
#----------------------------------------------------------------------

package require Tcl 8.0
package require cmdline

namespace eval ::struct { namespace eval list {} }

namespace eval ::struct::list {
    namespace export list

    if {0} {
        # Possibly in the future.
        namespace export Lassign
        namespace export LdbJoin
        namespace export LdbJoinOuter
        namespace export Lequal
        namespace export Lfilter
        namespace export Lfilterfor
        namespace export Lfirstperm
        namespace export Lflatten
        namespace export Lfold
        namespace export Lforeachperm
        namespace export Liota
        namespace export LlcsInvert
        namespace export LlcsInvert2
        namespace export LlcsInvertMerge
        namespace export LlcsInvertMerge2
        namespace export LlongestCommonSubsequence
        namespace export LlongestCommonSubsequence2
        namespace export Lmap
        namespace export Lmapfor
        namespace export Lnextperm
        namespace export Lpermutations
        namespace export Lrepeat
        namespace export Lrepeatn
        namespace export Lreverse
        namespace export Lshift
        namespace export Lswap
    }
}

##########################
# Public functions

# ::struct::list::list --
#
#       Command that access all list commands.
#
# Arguments:
#       cmd     Name of the subcommand to dispatch to.
#       args    Arguments for the subcommand.
#
# Results:
#       Whatever the result of the subcommand is.

proc ::struct::list::list {cmd args} {
    # Do minimal args checks here
    if { [llength [info level 0]] == 1 } {
        return -code error "wrong # args: should be \"$cmd ?arg arg ...?\""
    }
    set sub L$cmd
    if { [llength [info commands ::struct::list::$sub]] == 0 } {
        set optlist [info commands ::struct::list::L*]
        set xlist {}
        foreach p $optlist {
            lappend xlist [string range $p 1 end]
        }
        return -code error \
                "bad option \"$cmd\": must be [linsert [join $xlist ", "] "end-1" "or"]"
    }
    return [uplevel 1 [linsert $args 0 ::struct::list::$sub]]
}

##########################
# Private functions follow
#
# Do a compatibility version of [lset] for pre-8.4 versions of Tcl.
# This version does not do multi-arg [lset]!

proc ::struct::list::K { x y } { set x }

if { [package vcompare [package provide Tcl] 8.4] < 0 } {
    proc ::struct::list::lset { var index arg } {
        upvar 1 $var list
        set list [::lreplace [K $list [set list {}]] $index $index $arg]
    }
}

##########################
# Implementations of the functionality.
#

# ::struct::list::LlongestCommonSubsequence --
#
#       Computes the longest common subsequence of two lists.
#
# Parameters:
#       sequence1, sequence2 -- Two lists to compare.
#       maxOccurs -- If provided, causes the procedure to ignore
#                    lines that appear more than $maxOccurs times
#                    in the second sequence.  See below for a discussion.
# Results:
#       Returns a list of two lists of equal length.
#       The first sublist is of indices into sequence1, and the
#       second sublist is of indices into sequence2.  Each corresponding
#       pair of indices corresponds to equal elements in the sequences;
#       the sequence returned is the longest possible.
#
# Side effects:
#       None.
#
# Notes:
#
#       While this procedure is quite rapid for many tasks of file
# comparison, its performance degrades severely if the second list
# contains many equal elements (as, for instance, when using this
# procedure to compare two files, a quarter of whose lines are blank.
# This drawback is intrinsic to the algorithm used (see the References
# for details).  One approach to dealing with this problem that is
# sometimes effective in practice is arbitrarily to exclude elements
# that appear more than a certain number of times.  This number is
# provided as the 'maxOccurs' parameter.  If frequent lines are
# excluded in this manner, they will not appear in the common subsequence
# that is computed; the result will be the longest common subsequence
# of infrequent elements.
#
#       The procedure struct::list::LongestCommonSubsequence2
# functions as a wrapper around this procedure; it computes the longest
# common subsequence of infrequent elements, and then subdivides the
# subsequences that lie between the matches to approximate the true
# longest common subsequence.
#
# References:
#       J. W. Hunt and M. D. McIlroy, "An algorithm for differential
#       file comparison," Comp. Sci. Tech. Rep. #41, Bell Telephone
#       Laboratories (1976). Available on the Web at the second
#       author's personal site: http://www.cs.dartmouth.edu/~doug/

proc ::struct::list::LlongestCommonSubsequence {
    sequence1
    sequence2
    {maxOccurs 0x7fffffff}
} {
    # Construct a set of equivalence classes of lines in file 2

    set index 0
    foreach string $sequence2 {
        lappend eqv($string) $index
        incr index
    }

    # K holds descriptions of the common subsequences.
    # Initially, there is one common subsequence of length 0,
    # with a fence saying that it includes line -1 of both files.
    # The maximum subsequence length is 0; position 0 of
    # K holds a fence carrying the line following the end
    # of both files.

    lappend K [::list -1 -1 {}]
    lappend K [::list [llength $sequence1] [llength $sequence2] {}]
    set k 0

    # Walk through the first file, letting i be the index of the line and
    # string be the line itself.

    set i 0
    foreach string $sequence1 {
        # Consider each possible corresponding index j in the second file.

        if { [info exists eqv($string)]
             && [llength $eqv($string)] <= $maxOccurs } {

            # c is the candidate match most recently found, and r is the
            # length of the corresponding subsequence.

            set r 0
            set c [lindex $K 0]

            foreach j $eqv($string) {
                # Perform a binary search to find a candidate common
                # subsequence to which may be appended this match.

                set max $k
                set min $r
                set s [expr { $k + 1 }]
                while { $max >= $min } {
                    set mid [expr { ( $max + $min ) / 2 }]
                    set bmid [lindex [lindex $K $mid] 1]
                    if { $j == $bmid } {
                        break
                    } elseif { $j < $bmid } {
                        set max [expr {$mid - 1}]
                    } else {
                        set s $mid
                        set min [expr { $mid + 1 }]
                    }
                }

                # Go to the next match point if there is no suitable
                # candidate.

                if { $j == [lindex [lindex $K $mid] 1] || $s > $k} {
                    continue
                }

                # s is the sequence length of the longest sequence
                # to which this match point may be appended. Make
                # a new candidate match and store the old one in K
                # Set r to the length of the new candidate match.

                set newc [::list $i $j [lindex $K $s]]
                if { $r >= 0 } {
                    lset K $r $c
                }
                set c $newc
                set r [expr { $s + 1 }]

                # If we've extended the length of the longest match,
                # we're done; move the fence.

                if { $s >= $k } {
                    lappend K [lindex $K end]
                    incr k
                    break
                }
            }

            # Put the last candidate into the array

            lset K $r $c
        }

        incr i
    }

    # Package the common subsequence in a convenient form

    set seta {}
    set setb {}
    set q [lindex $K $k]

    for { set i 0 } { $i < $k } {incr i } {
        lappend seta {}
        lappend setb {}
    }
    while { [lindex $q 0] >= 0 } {
        incr k -1
        lset seta $k [lindex $q 0]
        lset setb $k [lindex $q 1]
        set q [lindex $q 2]
    }

    return [::list $seta $setb]
}

# ::struct::list::LlongestCommonSubsequence2 --
#
#       Derives an approximation to the longest common subsequence
#       of two lists.
#
# Parameters:
#       sequence1, sequence2 - Lists to be compared
#       maxOccurs - Parameter for imprecise matching - see below.
#
# Results:
#       Returns a list of two lists of equal length.
#       The first sublist is of indices into sequence1, and the
#       second sublist is of indices into sequence2.  Each corresponding
#       pair of indices corresponds to equal elements in the sequences;
#       the sequence returned is an approximation to the longest possible.
#
# Side effects:
#       None.
#
# Notes:
#       This procedure acts as a wrapper around the companion procedure
#       struct::list::LongestCommonSubsequence and accepts the same
#       parameters.  It first computes the longest common subsequence of
#       elements that occur no more than $maxOccurs times in the
#       second list.  Using that subsequence to align the two lists,
#       it then tries to augment the subsequence by computing the true
#       longest common subsequences of the sublists between matched pairs.

proc ::struct::list::LlongestCommonSubsequence2 {
    sequence1
    sequence2
    {maxOccurs 0x7fffffff}
} {
    # Derive the longest common subsequence of elements that occur at
    # most $maxOccurs times

    foreach { l1 l2 } \
        [LlongestCommonSubsequence $sequence1 $sequence2 $maxOccurs] {
            break
        }

    # Walk through the match points in the sequence just derived.

    set result1 {}
    set result2 {}
    set n1 0
    set n2 0
    foreach i1 $l1 i2 $l2 {
        if { $i1 != $n1 && $i2 != $n2 } {
            # The match points indicate that there are unmatched
            # elements lying between them in both input sequences.
            # Extract the unmatched elements and perform precise
            # longest-common-subsequence analysis on them.

            set subl1 [lrange $sequence1 $n1 [expr { $i1 - 1 }]]
            set subl2 [lrange $sequence2 $n2 [expr { $i2 - 1 }]]
            foreach { m1 m2 } [LlongestCommonSubsequence $subl1 $subl2] break
            foreach j1 $m1 j2 $m2 {
                lappend result1 [expr { $j1 + $n1 }]
                lappend result2 [expr { $j2 + $n2 }]
            }
        }

        # Add the current match point to the result

        lappend result1 $i1
        lappend result2 $i2
        set n1 [expr { $i1 + 1 }]
        set n2 [expr { $i2 + 1 }]
    }

    # If there are unmatched elements after the last match in both files,
    # perform precise longest-common-subsequence matching on them and
    # add the result to our return.

    if { $n1 < [llength $sequence1] && $n2 < [llength $sequence2] } {
        set subl1 [lrange $sequence1 $n1 end]
        set subl2 [lrange $sequence2 $n2 end]
        foreach { m1 m2 } [LlongestCommonSubsequence $subl1 $subl2] break
        foreach j1 $m1 j2 $m2 {
            lappend result1 [expr { $j1 + $n1 }]
            lappend result2 [expr { $j2 + $n2 }]
        }
    }

    return [::list $result1 $result2]
}

# ::struct::list::LlcsInvert --
#
#       Takes the data describing a longest common subsequence of two
#       lists and inverts the information in the sense that the result
#       of this command will describe the differences between the two
#       sequences instead of the identical parts.
#
# Parameters:
#       lcsData         longest common subsequence of two lists as
#                       returned by longestCommonSubsequence(2).
# Results:
#       Returns a single list whose elements describe the differences
#       between the original two sequences. Each element describes
#       one difference through three pieces, the type of the change,
#       a pair of indices in the first sequence and a pair of indices
#       into the second sequence, in this order.
#
# Side effects:
#       None.

proc ::struct::list::LlcsInvert {lcsData len1 len2} {
    return [LlcsInvert2 [::lindex $lcsData 0] [::lindex $lcsData 1] $len1 $len2]
}

proc ::struct::list::LlcsInvert2 {idx1 idx2 len1 len2} {
    set result {}
    set last1 -1
    set last2 -1

    foreach a $idx1 b $idx2 {
        # Four possible cases.
        # a) last1 ... a and last2 ... b are not empty.
        #    This is a 'change'.
        # b) last1 ... a is empty, last2 ... b is not.
        #    This is an 'addition'.
        # c) last1 ... a is not empty, last2 ... b is empty.
        #    This is a deletion.
        # d) If both ranges are empty we can ignore the
        #    two current indices.

        set empty1 [expr {($a - $last1) <= 1}]
        set empty2 [expr {($b - $last2) <= 1}]

        if {$empty1 && $empty2} {
            # Case (d), ignore the indices
        } elseif {$empty1} {
            # Case (b), 'addition'.
            incr last2 ; incr b -1
            lappend result [::list added [::list $last1 $a] [::list $last2 $b]]
            incr b
        } elseif {$empty2} {
            # Case (c), 'deletion'
            incr last1 ; incr a -1
            lappend result [::list deleted [::list $last1 $a] [::list $last2 $b]]
            incr a
        } else {
            # Case (q), 'change'.
            incr last1 ; incr a -1
            incr last2 ; incr b -1
            lappend result [::list changed [::list $last1 $a] [::list $last2 $b]]
            incr a
            incr b
        }

        set last1 $a
        set last2 $b
    }

    # Handle the last chunk, using the information about the length of
    # the original sequences.

    set empty1 [expr {($len1 - $last1) <= 1}]
    set empty2 [expr {($len2 - $last2) <= 1}]

    if {$empty1 && $empty2} {
        # Case (d), ignore the indices
    } elseif {$empty1} {
        # Case (b), 'addition'.
        incr last2 ; incr len2 -1
        lappend result [::list added [::list $last1 $len1] [::list $last2 $len2]]
    } elseif {$empty2} {
        # Case (c), 'deletion'
        incr last1 ; incr len1 -1
        lappend result [::list deleted [::list $last1 $len1] [::list $last2 $len2]]
    } else {
        # Case (q), 'change'.
        incr last1 ; incr len1 -1
        incr last2 ; incr len2 -1
        lappend result [::list changed [::list $last1 $len1] [::list $last2 $len2]]
    }

    return $result
}

proc ::struct::list::LlcsInvertMerge {lcsData len1 len2} {
    return [LlcsInvertMerge2 [::lindex $lcsData 0] [::lindex $lcsData 1] $len1 $len2]
}

proc ::struct::list::LlcsInvertMerge2 {idx1 idx2 len1 len2} {
    set result {}
    set last1 -1
    set last2 -1

    foreach a $idx1 b $idx2 {
        # Four possible cases.
        # a) last1 ... a and last2 ... b are not empty.
        #    This is a 'change'.
        # b) last1 ... a is empty, last2 ... b is not.
        #    This is an 'addition'.
        # c) last1 ... a is not empty, last2 ... b is empty.
        #    This is a deletion.
        # d) If both ranges are empty we can ignore the
        #    two current indices. For merging we simply
        #    take the information from the input.

        set empty1 [expr {($a - $last1) <= 1}]
        set empty2 [expr {($b - $last2) <= 1}]

        if {$empty1 && $empty2} {
            # Case (d), add 'unchanged' chunk.
            set type --
            foreach {type left right} [lindex $result end] break
            if {[string match unchanged $type]} {
                # There is an existing result to extend
                lset left end $a
                lset right end $b
                lset result end [::list unchanged $left $right]
            } else {
                # There is an unchanged result at the start of the list;
                # it may be extended.
                lappend result [::list unchanged [::list $a $a] [::list $b $b]]
            }
        } else {
            if {$empty1} {
                # Case (b), 'addition'.
                incr last2 ; incr b -1
                lappend result [::list added [::list $last1 $a] [::list $last2 $b]]
                incr b
            } elseif {$empty2} {
                # Case (c), 'deletion'
                incr last1 ; incr a -1
                lappend result [::list deleted [::list $last1 $a] [::list $last2 $b]]
                incr a
            } else {
                # Case (a), 'change'.
                incr last1 ; incr a -1
                incr last2 ; incr b -1
                lappend result [::list changed [::list $last1 $a] [::list $last2 $b]]
                incr a
                incr b
            }
            # Finally, the two matching lines are a new unchanged region
            lappend result [::list unchanged [::list $a $a] [::list $b $b]]
        }
        set last1 $a
        set last2 $b
    }

    # Handle the last chunk, using the information about the length of
    # the original sequences.

    set empty1 [expr {($len1 - $last1) <= 1}]
    set empty2 [expr {($len2 - $last2) <= 1}]

    if {$empty1 && $empty2} {
        # Case (d), ignore the indices
    } elseif {$empty1} {
        # Case (b), 'addition'.
        incr last2 ; incr len2 -1
        lappend result [::list added [::list $last1 $len1] [::list $last2 $len2]]
    } elseif {$empty2} {
        # Case (c), 'deletion'
        incr last1 ; incr len1 -1
        lappend result [::list deleted [::list $last1 $len1] [::list $last2 $len2]]
    } else {
        # Case (q), 'change'.
        incr last1 ; incr len1 -1
        incr last2 ; incr len2 -1
        lappend result [::list changed [::list $last1 $len1] [::list $last2 $len2]]
    }

    return $result
}

# ::struct::list::Lreverse --
#
#       Reverses the contents of the list and returns the reversed
#       list as the result of the command.
#
# Parameters:
#       sequence        List to be reversed.
#
# Results:
#       The sequence in reverse.
#
# Side effects:
#       None.

proc ::struct::list::Lreverse {sequence} {
    set l [::llength $sequence]

    # Shortcut for lists where reversing yields the list itself
    if {$l < 2} {return $sequence}

    # Perform true reversal
    set res [::list]
    while {$l} {
        ::lappend res [::lindex $sequence [incr l -1]]
    }
    return $res
}


# ::struct::list::Lassign --
#
#       Assign list elements to variables.
#
# Parameters:
#       sequence        List to assign
#       args            Names of the variables to assign to.
#
# Results:
#       The unassigned part of the sequence. Can be empty.
#
# Side effects:
#       None.

# Do a compatibility version of [assign] for pre-8.5 versions of Tcl.

if { [package vcompare [package provide Tcl] 8.5] < 0 } {

    proc ::struct::list::Lassign {sequence v args} {
        set args [linsert $args 0 $v]
        set a [::llength $args]

        # Nothing to assign.
        #if {$a == 0} {return $sequence}

        # Perform assignments
        set i 0
        foreach v $args {
            upvar 1 $v var
            set      var [::lindex $sequence $i]
            incr i
        }

        # Return remainder, if there is any.
        return [::lrange $sequence $a end]
}

} else {
    # For 8.5 simply redirect the method to the core command.

    interp alias {} ::struct::list::Lassign {} lassign
}


# ::struct::list::Lshift --
#
#       Shift a list in a variable one element down, and return first element
#
# Parameters:
#       listvar         Name of variable containing the list to shift.
#
# Results:
#       The first element of the list.
#
# Side effects:
#       After the call the list variable will contain
#       the second to last elements of the list.

proc ::struct::list::Lshift {listvar} {
    upvar 1 $listvar list
    set list [Lassign [K $list [set list {}]] v]
    return $v
}


# ::struct::list::Lflatten --
#
#       Remove nesting from the input
#
# Parameters:
#       sequence        List to flatten
#
# Results:
#       The input list with one or all levels of nesting removed.
#
# Side effects:
#       None.

proc ::struct::list::Lflatten {args} {
    if {[::llength $args] < 1} {
        return -code error \
                "wrong#args: should be \"::struct::list::Lflatten ?-full? ?--? sequence\""
    }

    set full 0
    while {[string match -* [set opt [::lindex $args 0]]]} {
        switch -glob -- $opt {
            -full   {set full 1}
            --      {break}
            default {
                return -code error "Unknown option \"$opt\", should be either -full, or --"
            }
        }
        set args [::lrange $args 1 end]
    }

    if {[::llength $args] != 1} {
        return -code error \
                "wrong#args: should be \"::struct::list::Lflatten ?-full? ?--? sequence\""
    }

    set sequence [::lindex $args 0]
    set cont 1
    while {$cont} {
        set cont 0
        set result [::list]
        foreach item $sequence {
            # catch/llength detects if the item is following the list
            # syntax.

            if {[catch {llength $item} len]} {
                # Element is not a list in itself, no flatten, add it
                # as is.
                lappend result $item
            } else {
                # Element is parseable as list, add all sub-elements
                # to the result.
                foreach e $item {
                    lappend result $e
                }
            }
        }
        if {$full && [string compare $sequence $result]} {set cont 1}
        set sequence $result
    }
    return $result
}


# ::struct::list::Lmap --
#
#       Apply command to each element of a list and return concatenated results.
#
# Parameters:
#       sequence        List to operate on
#       cmdprefix       Operation to perform on the elements.
#
# Results:
#       List containing the result of applying cmdprefix to the elements of the
#       sequence.
#
# Side effects:
#       None of its own, but the command prefix can perform arbitry actions.

proc ::struct::list::Lmap {sequence cmdprefix} {
    # Shortcut when nothing is to be done.
    if {[::llength $sequence] == 0} {return $sequence}

    set res [::list]
    foreach item $sequence {
        lappend res [uplevel 1 [linsert $cmdprefix end $item]]
    }
    return $res
}

# ::struct::list::Lmapfor --
#
#       Apply a script to each element of a list and return concatenated results.
#
# Parameters:
#       sequence        List to operate on
#       script          The script to run on the elements.
#
# Results:
#       List containing the result of running script on the elements of the
#       sequence.
#
# Side effects:
#       None of its own, but the script can perform arbitry actions.

proc ::struct::list::Lmapfor {var sequence script} {
    # Shortcut when nothing is to be done.
    if {[::llength $sequence] == 0} {return $sequence}
    upvar 1 $var item

    set res [::list]
    foreach item $sequence {
        lappend res [uplevel 1 $script]
    }
    return $res
}

# ::struct::list::Lfilter --
#
#       Apply command to each element of a list and return elements passing the test.
#
# Parameters:
#       sequence        List to operate on
#       cmdprefix       Test to perform on the elements.
#
# Results:
#       List containing the elements of the input passing the test command.
#
# Side effects:
#       None of its own, but the command prefix can perform arbitrary actions.

proc ::struct::list::Lfilter {sequence cmdprefix} {
    # Shortcut when nothing is to be done.
    if {[::llength $sequence] == 0} {return $sequence}
    return [Lfold $sequence {} [::list ::struct::list::FTest $cmdprefix]]
}

proc ::struct::list::FTest {cmdprefix result item} {
    set pass [uplevel 1 [::linsert $cmdprefix end $item]]
    if {$pass} {::lappend result $item}
    return $result
}

# ::struct::list::Lfilterfor --
#
#       Apply expr condition to each element of a list and return elements passing the test.
#
# Parameters:
#       sequence        List to operate on
#       expr            Test to perform on the elements.
#
# Results:
#       List containing the elements of the input passing the test expression.
#
# Side effects:
#       None of its own, but the command prefix can perform arbitrary actions.

proc ::struct::list::Lfilterfor {var sequence expr} {
    # Shortcut when nothing is to be done.
    if {[::llength $sequence] == 0} {return $sequence}

    upvar 1 $var item
    set result {}
    foreach item $sequence {
        if {[uplevel 1 [::list ::expr $expr]]} {
            lappend result $item
        }
    }
    return $result
}

# ::struct::list::Lsplit --
#
#       Apply command to each element of a list and return elements passing
#       and failing the test. Basic idea by Salvatore Sanfilippo
#       (http://wiki.tcl.tk/lsplit). The implementation here is mine (AK),
#       and the interface is slightly different (Command prefix with the
#       list element given to it as argument vs. variable + script).
#
# Parameters:
#       sequence        List to operate on
#       cmdprefix       Test to perform on the elements.
#       args = empty | (varPass varFail)
#
# Results:
#       If the variables are specified then a list containing the
#       numbers of passing and failing elements, in this
#       order. Otherwise a list having two elements, the lists of
#       passing and failing elements, in this order.
#
# Side effects:
#       None of its own, but the command prefix can perform arbitrary actions.

proc ::struct::list::Lsplit {sequence cmdprefix args} {
    set largs [::llength $args]
    if {$largs == 0} {
        # Shortcut when nothing is to be done.
        if {[::llength $sequence] == 0} {return {{} {}}}
        return [Lfold $sequence {} [::list ::struct::list::PFTest $cmdprefix]]
    } elseif {$largs == 2} {
        # Shortcut when nothing is to be done.
        foreach {pv fv} $args break
        upvar 1 $pv pass $fv fail
        if {[::llength $sequence] == 0} {
            set pass {}
            set fail {}
            return {0 0}
        }
        foreach {pass fail} [Lfold $sequence {} [::list ::struct::list::PFTest $cmdprefix]] break
        return [::list [llength $pass] [llength $fail]]
    } else {
        return -code error \
                "wrong#args: should be \"::struct::list::Lsplit sequence cmdprefix ?passVar failVar?"
    }
}

proc ::struct::list::PFTest {cmdprefix result item} {
    set passing [uplevel 1 [::linsert $cmdprefix end $item]]
    set pass {} ; set fail {}
    foreach {pass fail} $result break
    if {$passing} {
        ::lappend pass $item
    } else {
        ::lappend fail $item
    }
    return [::list $pass $fail]
}

# ::struct::list::Lfold --
#
#       Fold list into one value.
#
# Parameters:
#       sequence        List to operate on
#       cmdprefix       Operation to perform on the elements.
#
# Results:
#       Result of applying cmdprefix to the elements of the
#       sequence.
#
# Side effects:
#       None of its own, but the command prefix can perform arbitry actions.

proc ::struct::list::Lfold {sequence initialvalue cmdprefix} {
    # Shortcut when nothing is to be done.
    if {[::llength $sequence] == 0} {return $initialvalue}

    set res $initialvalue
    foreach item $sequence {
        set res [uplevel 1 [linsert $cmdprefix end $res $item]]
    }
    return $res
}

# ::struct::list::Liota --
#
#       Return a list containing the integer numbers 0 ... n-1
#
# Parameters:
#       n       First number not in the generated list.
#
# Results:
#       A list containing integer numbers.
#
# Side effects:
#       None

proc ::struct::list::Liota {n} {
    set retval [::list]
    for {set i 0} {$i < $n} {incr i} {
        ::lappend retval $i
    }
    return $retval
}

# ::struct::list::Lequal --
#
#       Compares two lists for equality
#       (Same length, Same elements in same order).
#
# Parameters:
#       a       First list to compare.
#       b       Second list to compare.
#
# Results:
#       A boolean. True if the lists are equal.
#
# Side effects:
#       None

proc ::struct::list::Lequal {a b} {
    # Author of this command is "Richard Suchenwirth"

    if {[::llength $a] != [::llength $b]} {return 0}
    if {[::lindex $a 0] == $a} {return [string equal $a $b]}
    foreach i $a j $b {if {![Lequal $i $j]} {return 0}}
    return 1
}

# ::struct::list::Lrepeatn --
#
#       Create a list repeating the same value over again.
#
# Parameters:
#       value   value to use in the created list.
#       args    Dimension(s) of the (nested) list to create.
#
# Results:
#       A list
#
# Side effects:
#       None

proc ::struct::list::Lrepeatn {value args} {
    if {[::llength $args] == 1} {set args [::lindex $args 0]}
    set buf {}
    foreach number $args {
        incr number 0 ;# force integer (1)
        set buf {}
        for {set i 0} {$i<$number} {incr i} {
            ::lappend buf $value
        }
        set value $buf
    }
    return $buf
    # (1): See 'Stress testing' (wiki) for why this makes the code safer.
}

# ::struct::list::Lrepeat --
#
#       Create a list repeating the same value over again.
#       [Identical to the Tcl 8.5 lrepeat command]
#
# Parameters:
#       n       Number of replications.
#       args    values to use in the created list.
#
# Results:
#       A list
#
# Side effects:
#       None

# Do a compatibility version of [repeat] for pre-8.5 versions of Tcl.

if { [package vcompare [package provide Tcl] 8.5] < 0 } {

    proc ::struct::list::Lrepeat {positiveCount value args} {
        if {![string is integer -strict $positiveCount]} {
            return -code error "expected integer but got \"$positiveCount\""
        } elseif {$positiveCount < 1} {
            return -code error {must have a count of at least 1}
        }

        set args   [linsert $args 0 $value]

        if {$positiveCount == 1} {
            # Tcl itself has already listified the incoming parameters
            # via 'args'.
            return $args
        }

        set result [::list]
        while {$positiveCount > 0} {
            if {($positiveCount % 2) == 0} {
                set args [concat $args $args]
                set positiveCount [expr {$positiveCount/2}]
            } else {
                set result [concat $result $args]
                incr positiveCount -1
            }
        }
        return $result
    }

} else {
    # For 8.5 simply redirect the method to the core command.

    interp alias {} ::struct::list::Lrepeat {} lrepeat
}

# ::struct::list::LdbJoin(Keyed) --
#
#       Relational table joins.
#
# Parameters:
#       args    key specs and tables to join
#
# Results:
#       A table/matrix as nested list. See
#       struct/matrix set/get rect for structure.
#
# Side effects:
#       None

proc ::struct::list::LdbJoin {args} {
    # --------------------------------
    # Process options ...

    set mode   inner
    set keyvar {}

    while {[llength $args]} {
        set err [::cmdline::getopt args {inner left right full keys.arg} opt arg]
        if {$err == 1} {
            if {[string equal $opt keys]} {
                set keyvar $arg
            } else {
                set mode $opt
            }
        } elseif {$err < 0} {
            return -code error "wrong#args: dbJoin ?-inner|-left|-right|-full? ?-keys varname? \{key table\}..."
        } else {
            # Non-option argument found, stop processing.
            break
        }
    }

    set inner       [string equal $mode inner]
    set innerorleft [expr {$inner || [string equal $mode left]}]

    # --------------------------------
    # Process tables ...

    if {([llength $args] % 2) != 0} {
        return -code error "wrong#args: dbJoin ?-inner|-left|-right|-full? \{key table\}..."
    }

    # One table only, join is identity
    if {[llength $args] == 2} {return [lindex $args 1]}

    # Use first table for setup.

    foreach {key table} $args break

    # Check for possible early abort
    if {$innerorleft && ([llength $table] == 0)} {return {}}

    set width 0
    array set state {}

    set keylist [InitMap state width $key $table]

    # Extend state with the remaining tables.

    foreach {key table} [lrange $args 2 end] {
        # Check for possible early abort
        if {$inner && ([llength $table] == 0)} {return {}}

        switch -exact -- $mode {
            inner {set keylist [MapExtendInner      state       $key $table]}
            left  {set keylist [MapExtendLeftOuter  state width $key $table]}
            right {set keylist [MapExtendRightOuter state width $key $table]}
            full  {set keylist [MapExtendFullOuter  state width $key $table]}
        }

        # Check for possible early abort
        if {$inner && ([llength $keylist] == 0)} {return {}}
    }

    if {[string length $keyvar]} {
        upvar 1 $keyvar keys
        set             keys $keylist
    }

    return [MapToTable state $keylist]
}

proc ::struct::list::LdbJoinKeyed {args} {
    # --------------------------------
    # Process options ...

    set mode   inner
    set keyvar {}

    while {[llength $args]} {
        set err [::cmdline::getopt args {inner left right full keys.arg} opt arg]
        if {$err == 1} {
            if {[string equal $opt keys]} {
                set keyvar $arg
            } else {
                set mode $opt
            }
        } elseif {$err < 0} {
            return -code error "wrong#args: dbJoin ?-inner|-left|-right|-full? table..."
        } else {
            # Non-option argument found, stop processing.
            break
        }
    }

    set inner       [string equal $mode inner]
    set innerorleft [expr {$inner || [string equal $mode left]}]

    # --------------------------------
    # Process tables ...

    # One table only, join is identity
    if {[llength $args] == 1} {
        return [Dekey [lindex $args 0]]
    }

    # Use first table for setup.

    set table [lindex $args 0]

    # Check for possible early abort
    if {$innerorleft && ([llength $table] == 0)} {return {}}

    set width 0
    array set state {}

    set keylist [InitKeyedMap state width $table]

    # Extend state with the remaining tables.

    foreach table [lrange $args 1 end] {
        # Check for possible early abort
        if {$inner && ([llength $table] == 0)} {return {}}

        switch -exact -- $mode {
            inner {set keylist [MapKeyedExtendInner      state       $table]}
            left  {set keylist [MapKeyedExtendLeftOuter  state width $table]}
            right {set keylist [MapKeyedExtendRightOuter state width $table]}
            full  {set keylist [MapKeyedExtendFullOuter  state width $table]}
        }

        # Check for possible early abort
        if {$inner && ([llength $keylist] == 0)} {return {}}
    }

    if {[string length $keyvar]} {
        upvar 1 $keyvar keys
        set             keys $keylist
    }

    return [MapToTable state $keylist]
}

## Helpers for the relational joins.
## Map is an array mapping from keys to a list
## of rows with that key

proc ::struct::list::Cartesian {leftmap rightmap key} {
    upvar $leftmap left $rightmap right
    set joined [::list]
    foreach lrow $left($key) {
        foreach row $right($key) {
            lappend joined [concat $lrow $row]
        }
    }
    set left($key) $joined
    return
}

proc ::struct::list::SingleRightCartesian {mapvar key rightrow} {
    upvar $mapvar map
    set joined [::list]
    foreach lrow $map($key) {
        lappend joined [concat $lrow $rightrow]
    }
    set map($key) $joined
    return
}

proc ::struct::list::MapToTable {mapvar keys} {
    # Note: keys must not appear multiple times in the list.

    upvar $mapvar map
    set table [::list]
    foreach k $keys {
        foreach row $map($k) {lappend table $row}
    }
    return $table
}

## More helpers, core join operations: Init, Extend.

proc ::struct::list::InitMap {mapvar wvar key table} {
    upvar $mapvar map $wvar width
    set width [llength [lindex $table 0]]
    foreach row $table {
        set keyval [lindex $row $key]
        if {[info exists map($keyval)]} {
            lappend map($keyval) $row
        } else {
            set map($keyval) [::list $row]
        }
    }
    return [array names map]
}

proc ::struct::list::MapExtendInner {mapvar key table} {
    upvar $mapvar map
    array set used {}

    # Phase I - Find all keys in the second table matching keys in the
    # first. Remember all their rows.
    foreach row $table {
        set keyval [lindex $row $key]
        if {[info exists map($keyval)]} {
            if {[info exists used($keyval)]} {
                lappend used($keyval) $row
            } else {
                set used($keyval) [::list $row]
            }
        } ; # else: Nothing to do for missing keys.
    }

    # Phase II - Merge the collected rows of the second (right) table
    # into the map, and eliminate all entries which have no keys in
    # the second table.
    foreach k [array names map] {
        if {[info exists  used($k)]} {
            Cartesian map used $k
        } else {
            unset map($k)
        }
    }
    return [array names map]
}

proc ::struct::list::MapExtendRightOuter {mapvar wvar key table} {
    upvar $mapvar map $wvar width
    array set used {}

    # Phase I - We keep all keys of the right table, even if they are
    # missing in the left one <=> Definition of right outer join.

    set w [llength [lindex $table 0]]
    foreach row $table {
        set keyval [lindex $row $key]
        if {[info exists used($keyval)]} {
            lappend used($keyval) $row
        } else {
            set used($keyval) [::list $row]
        }
    }

    # Phase II - Merge the collected rows of the second (right) table
    # into the map, and eliminate all entries which have no keys in
    # the second table. If there is nothing in the left table we
    # create an appropriate empty row for the cartesian => definition
    # of right outer join.

    # We go through used, because map can be empty for outer

    foreach k [array names map] {
        if {![info exists used($k)]} {
            unset map($k)
        }
    }
    foreach k [array names used] {
        if {![info exists map($k)]} {
            set map($k) [::list [Lrepeatn {} $width]]
        }
        Cartesian map used $k
    }

    incr width $w
    return [array names map]
}

proc ::struct::list::MapExtendLeftOuter {mapvar wvar key table} {
    upvar $mapvar map $wvar width
    array set used {}

    ## Keys: All in inner join + additional left keys 
    ##       == All left keys = array names map after
    ##          all is said and done with it.

    # Phase I - Find all keys in the second table matching keys in the
    # first. Remember all their rows.
    set w [llength [lindex $table 0]]
    foreach row $table {
        set keyval [lindex $row $key]
        if {[info exists map($keyval)]} {
            if {[info exists used($keyval)]} {
                lappend used($keyval) $row
            } else {
                set used($keyval) [::list $row]
            }
        } ; # else: Nothing to do for missing keys.
    }

    # Phase II - Merge the collected rows of the second (right) table
    # into the map. We keep entries which have no keys in the second
    # table, we actually extend them <=> Left outer join.

    foreach k [array names map] {
        if {[info exists  used($k)]} {
            Cartesian map used $k
        } else {
            SingleRightCartesian map $k [Lrepeatn {} $w]
        }
    }
    incr width $w
    return [array names map]
}

proc ::struct::list::MapExtendFullOuter {mapvar wvar key table} {
    upvar $mapvar map $wvar width
    array set used {}

    # Phase I - We keep all keys of the right table, even if they are
    # missing in the left one <=> Definition of right outer join.

    set w [llength [lindex $table 0]]
    foreach row $table {
        set keyval [lindex $row $key]
        if {[info exists used($keyval)]} {
            lappend used($keyval) $row
        } else {
            lappend keylist $keyval
            set used($keyval) [::list $row]
        }
    }

    # Phase II - Merge the collected rows of the second (right) table
    # into the map. We keep entries which have no keys in the second
    # table, we actually extend them <=> Left outer join.
    # If there is nothing in the left table we create an appropriate
    # empty row for the cartesian => definition of right outer join.

    # We go through used, because map can be empty for outer

    foreach k [array names map] {
        if {![info exists used($k)]} {
            SingleRightCartesian map $k [Lrepeatn {} $w]
        }
    }
    foreach k [array names used] {
        if {![info exists map($k)]} {
            set map($k) [::list [Lrepeatn {} $width]]
        }
        Cartesian map used $k
    }

    incr width $w
    return [array names map]
}

## Keyed helpers

proc ::struct::list::InitKeyedMap {mapvar wvar table} {
    upvar $mapvar map $wvar width
    set width [llength [lindex [lindex $table 0] 1]]
    foreach row $table {
        foreach {keyval rowdata} $row break
        if {[info exists map($keyval)]} {
            lappend map($keyval) $rowdata
        } else {
            set map($keyval) [::list $rowdata]
        }
    }
    return [array names map]
}

proc ::struct::list::MapKeyedExtendInner {mapvar table} {
    upvar $mapvar map
    array set used {}

    # Phase I - Find all keys in the second table matching keys in the
    # first. Remember all their rows.
    foreach row $table {
        foreach {keyval rowdata} $row break
        if {[info exists map($keyval)]} {
            if {[info exists used($keyval)]} {
                lappend used($keyval) $rowdata
            } else {
                set used($keyval) [::list $rowdata]
            }
        } ; # else: Nothing to do for missing keys.
    }

    # Phase II - Merge the collected rows of the second (right) table
    # into the map, and eliminate all entries which have no keys in
    # the second table.
    foreach k [array names map] {
        if {[info exists  used($k)]} {
            Cartesian map used $k
        } else {
            unset map($k)
        }
    }

    return [array names map]
}

proc ::struct::list::MapKeyedExtendRightOuter {mapvar wvar table} {
    upvar $mapvar map $wvar width
    array set used {}

    # Phase I - We keep all keys of the right table, even if they are
    # missing in the left one <=> Definition of right outer join.

    set w [llength [lindex $table 0]]
    foreach row $table {
        foreach {keyval rowdata} $row break
        if {[info exists used($keyval)]} {
            lappend used($keyval) $rowdata
        } else {
            set used($keyval) [::list $rowdata]
        }
    }

    # Phase II - Merge the collected rows of the second (right) table
    # into the map, and eliminate all entries which have no keys in
    # the second table. If there is nothing in the left table we
    # create an appropriate empty row for the cartesian => definition
    # of right outer join.

    # We go through used, because map can be empty for outer

    foreach k [array names map] {
        if {![info exists used($k)]} {
            unset map($k)
        }
    }
    foreach k [array names used] {
        if {![info exists map($k)]} {
            set map($k) [::list [Lrepeatn {} $width]]
        }
        Cartesian map used $k
    }

    incr width $w
    return [array names map]
}

proc ::struct::list::MapKeyedExtendLeftOuter {mapvar wvar table} {
    upvar $mapvar map $wvar width
    array set used {}

    ## Keys: All in inner join + additional left keys 
    ##       == All left keys = array names map after
    ##          all is said and done with it.

    # Phase I - Find all keys in the second table matching keys in the
    # first. Remember all their rows.
    set w [llength [lindex $table 0]]
    foreach row $table {
        foreach {keyval rowdata} $row break
        if {[info exists map($keyval)]} {
            if {[info exists used($keyval)]} {
                lappend used($keyval) $rowdata
            } else {
                set used($keyval) [::list $rowdata]
            }
        } ; # else: Nothing to do for missing keys.
    }

    # Phase II - Merge the collected rows of the second (right) table
    # into the map. We keep entries which have no keys in the second
    # table, we actually extend them <=> Left outer join.

    foreach k [array names map] {
        if {[info exists  used($k)]} {
            Cartesian map used $k
        } else {
            SingleRightCartesian map $k [Lrepeatn {} $w]
        }
    }
    incr width $w
    return [array names map]
}

proc ::struct::list::MapKeyedExtendFullOuter {mapvar wvar table} {
    upvar $mapvar map $wvar width
    array set used {}

    # Phase I - We keep all keys of the right table, even if they are
    # missing in the left one <=> Definition of right outer join.

    set w [llength [lindex $table 0]]
    foreach row $table {
        foreach {keyval rowdata} $row break
        if {[info exists used($keyval)]} {
            lappend used($keyval) $rowdata
        } else {
            lappend keylist $keyval
            set used($keyval) [::list $rowdata]
        }
    }

    # Phase II - Merge the collected rows of the second (right) table
    # into the map. We keep entries which have no keys in the second
    # table, we actually extend them <=> Left outer join.
    # If there is nothing in the left table we create an appropriate
    # empty row for the cartesian => definition of right outer join.

    # We go through used, because map can be empty for outer

    foreach k [array names map] {
        if {![info exists used($k)]} {
            SingleRightCartesian map $k [Lrepeatn {} $w]
        }
    }
    foreach k [array names used] {
        if {![info exists map($k)]} {
            set map($k) [::list [Lrepeatn {} $width]]
        }
        Cartesian map used $k
    }

    incr width $w
    return [array names map]
}

proc ::struct::list::Dekey {keyedtable} {
    set table [::list]
    foreach row $keyedtable {lappend table [lindex $row 1]}
    return $table
}

# ::struct::list::Lswap --
#
#       Exchange two elements of a list.
#
# Parameters:
#       listvar Name of the variable containing the list to manipulate.
#       i, j    Indices of the list elements to exchange.
#
# Results:
#       The modified list
#
# Side effects:
#       None

proc ::struct::list::Lswap {listvar i j} {
    upvar $listvar list

    if {($i < 0) || ($j < 0)} {
        return -code error {list index out of range}
    }
    set len [llength $list]
    if {($i >= $len) || ($j >= $len)} {
        return -code error {list index out of range}
    }

    if {$i != $j} {
        set tmp      [lindex $list $i]
        lset list $i [lindex $list $j]
        lset list $j $tmp
    }
    return $list
}

# ::struct::list::Lfirstperm --
#
#       Returns the lexicographically first permutation of the
#       specified list.
#
# Parameters:
#       list    The list whose first permutation is sought.
#
# Results:
#       A modified list containing the lexicographically first
#       permutation of the input.
#
# Side effects:
#       None

proc ::struct::list::Lfirstperm {list} {
    return [lsort $list]
}

# ::struct::list::Lnextperm --
#
#       Accepts a permutation of a set of elements and returns the
#       next permutatation in lexicographic sequence.
#
# Parameters:
#       list    The list containing the current permutation.
#
# Results:
#       A modified list containing the lexicographically next
#       permutation after the input permutation.
#
# Side effects:
#       None

proc ::struct::list::Lnextperm {perm} {
    # Find the smallest subscript j such that we have already visited
    # all permutations beginning with the first j elements.

    set len [expr {[llength $perm] - 1}]

    set j $len
    set ajp1 [lindex $perm $j]
    while { $j > 0 } {
        incr j -1
        set aj [lindex $perm $j]
        if { [string compare $ajp1 $aj] > 0 } {
            set foundj {}
            break
        }
        set ajp1 $aj
    }
    if { ![info exists foundj] } return

    # Find the smallest element greater than the j'th among the elements
    # following aj. Let its index be l, and interchange aj and al.

    set l $len
    while { $aj >= [set al [lindex $perm $l]] } {
        incr l -1
    }
    lset perm $j $al
    lset perm $l $aj

    # Reverse a_j+1 ... an

    set k [expr {$j + 1}]
    set l $len
    while { $k < $l } {
        set al [lindex $perm $l]
        lset perm $l [lindex $perm $k]
        lset perm $k $al
        incr k
        incr l -1
    }

    return $perm
}

# ::struct::list::Lpermutations --
#
#       Returns a list containing all the permutations of the
#       specified list, in lexicographic order.
#
# Parameters:
#       list    The list whose permutations are sought.
#
# Results:
#       A list of lists, containing all permutations of the
#       input.
#
# Side effects:
#       None

proc ::struct::list::Lpermutations {list} {

    if {[llength $list] < 2} {
        return [list $list]
    }

    set res {}
    set p [Lfirstperm $list]
    while {[llength $p]} {
        lappend res $p
        set p [Lnextperm $p]
    }
    return $res
}

# ::struct::list::Lforeachperm --
#
#       Executes a script for all the permutations of the
#       specified list, in lexicographic order.
#
# Parameters:
#       var     Name of the loop variable.
#       list    The list whose permutations are sought.
#       body    The tcl script to run per permutation of
#               the input.
#
# Results:
#       The empty string.
#
# Side effects:
#       None

proc ::struct::list::Lforeachperm {var list body} {
    upvar $var loopvar

    if {[llength $list] < 2} {
        set loopvar $list
        # TODO run body.

        # The first invocation of the body, also the last, as only one
        # permutation is possible. That makes handling of the result
        # codes easier.

        set code [catch {uplevel 1 $body} result]

        # decide what to do upon the return code:
        #
        #               0 - the body executed successfully
        #               1 - the body raised an error
        #               2 - the body invoked [return]
        #               3 - the body invoked [break]
        #               4 - the body invoked [continue]
        # everything else - return and pass on the results
        #
        switch -exact -- $code {
            0 {}
            1 {
                return -errorinfo [ErrorInfoAsCaller uplevel foreachperm]  \
                    -errorcode $::errorCode -code error $result
            }
            3 {}
            4 {}
            default {
                # Includes code 2
                return -code $code $result
            }
        }
        return
    }

    set p [Lfirstperm $list]
    while {[llength $p]} {
        set loopvar $p

        set code [catch {uplevel 1 $body} result]

        # decide what to do upon the return code:
        #
        #               0 - the body executed successfully
        #               1 - the body raised an error
        #               2 - the body invoked [return]
        #               3 - the body invoked [break]
        #               4 - the body invoked [continue]
        # everything else - return and pass on the results
        #
        switch -exact -- $code {
            0 {}
            1 {
                return -errorinfo [ErrorInfoAsCaller uplevel foreachperm]  \
                    -errorcode $::errorCode -code error $result
            }
            3 {
                # FRINK: nocheck
                return
            }
            4 {}
            default {
                return -code $code $result
            }
        }
        set p [Lnextperm $p]
    }
    return
}

proc ::struct::list::ErrorInfoAsCaller {find replace} {
    set info $::errorInfo
    set i [string last "\n    (\"$find" $info]
    if {$i == -1} {return $info}
    set result [string range $info 0 [incr i 6]]        ;# keep "\n    (\""
    append result $replace                      ;# $find -> $replace
    incr i [string length $find]
    set j [string first ) $info [incr i]]       ;# keep rest of parenthetical
    append result [string range $info $i $j]
    return $result
}

# ### ### ### ######### ######### #########
## Ready

namespace eval ::struct {
    # Get 'list::list' into the general structure namespace.
    namespace import -force list::list
    namespace export list
}
package provide struct::list 1.6.1